3X2 centrifugal slurry pumps

 Material used for  horizontal slurry pump wet end parts:

1)High chrome alloy: A05, A07, A49, etc.

2)Natural rubber: R08, R26, R33, R55, etc.

3)Other materials can be supplied as requirements .

 Applications of  horizontal slurry pump,3X2C  Slurry Pumps:

Alumina,Copper mining,Iron ore,Gas oil,Coal ,Electric industry,Phosphate,Bauxite,Gold,Potash, Wolfram,Water sewerage utilities,Sugar,Tobacco,Chemical fertilizer 

 Features of 3X2C  High Chrome Slurry Pump:

1)Double casings design centrifugal slurry pump, wide passage for solids;

2)Bearing assembly & frame: Both standard & high capacity typies available.  A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy duty roller bearing are housed in a removable bearing cartridge. Pump body is fastened with the frame by minimum bolts. Impeller adjustment is provided in a convenient position below the bearing assembly;

3)Impeller & liner material: high chrome white iron, rubber, etc;

4)High efficiency impeller available: up to 86.5% for certain type;

5)Interchangeable wet parts material: High chrome alloy metal: PH: 5-12; natural rubber: PH: 4-12;

6)Shaft seal: Packing seal, centrifugal seal, mechanical seal; 

7)Discharge branch: 8 positions in each 45°;

8) Driving type: V-belt, flexible coupling, gearbox, hydraulic coupler;

3/2C horizontal slurry pump, 3/2C centrifugal slurry pump,3/2C centrifugal slurry pump in China, 3/2C centrifugal horizontal slurry pump, 3/2C heavy duty slurry pump, 3/2C Coal mine slurry pump, 3/2C mine dewatering pump.

Construction design  of  horizontal slurry pumps, 3X2C  Pump with A05 Impeller,slurry pump 

1. Advanced water design, reasonable structure design, good cavitation performance, reliable operation etc features , which is used in metallurgy, mine, non-ferrous metal, electricity, coal etc to transport tailings, fine ore, ash, slime, gravel etc strong abrasive and high concentration slurry.

2. Adjusting gap is available. Small gap, high efficiency, less leakage. After a period of running, the impeller and guard plate have some wear, so that the efficiency of pump decrease, but by adjusting the gap between impeller and guard plate the efficiency of pump will reach the highest value again.

3. Product commonality. Our products are all international standard, parts can be interchangable.

4. Wear resistant and anti-corrosive material. Cr28 is a kind of material which is increased some Cr content on the basis of Cr26, and adding a certain amount of Mo,Ni,Ti,W,Cu,Re etc rare metal, thereby hardenability is increased and promote the formation of carbides MoC, the material has a higher wear resistance.

Production process of our pumps/  1.5/1B-AH slurry pump

OEM slurry pump and parts;